<input id="6s00c"><u id="6s00c"></u></input><menu id="6s00c"></menu>
  • <menu id="6s00c"></menu>
  • <input id="6s00c"><u id="6s00c"></u></input>
  • <input id="6s00c"><acronym id="6s00c"></acronym></input>
    <menu id="6s00c"></menu>
    <menu id="6s00c"><u id="6s00c"></u></menu>
  • <input id="6s00c"></input>
    <object id="6s00c"><acronym id="6s00c"></acronym></object>
  • <menu id="6s00c"><u id="6s00c"></u></menu>
    <input id="6s00c"></input>
  • <menu id="6s00c"><tt id="6s00c"></tt></menu>
    TEL:022-24390723  企业邮箱入口
    产品中心 > 齿轮机床 > YK2560A数控锥齿轮研齿机

    YK2560A数控锥齿轮研齿机

    YK2560A数控锥齿轮研齿机

    一、 机床结构

    采用大、小轮主轴水平放置的卧式布局,小轮主轴为主动轴做H(X)运动,并沿立柱做V(Y)运动。大轮主轴为从动轴做G(Z)运动;V、H、G运动分别由伺服电机驱动精密滚珠丝杠沿直线导轨实现。大、小轮主轴均采用电主轴,转速分别为2400转/分和3000转/分,传动平稳,精度高,噪音小,提高机床使用寿命。机床整体结构紧凑新颖,刚性好,占地面积小,操作者容易接近工件。

    二、 机床性能及适用范围

    本机床用于高速、精确地研磨最大工件直径达600毫米的弧齿及准双曲面锥齿轮副,适当修正热处理后的变形,研齿后齿面光洁度可达0.8以上,改善接触区位置和大小,传动平稳,降低噪音,提高承载力。适用于修正大、中、小型汽车后桥齿轮热处理后的变形。

    三、 机床的主要特点

    采用840Dsl数控系统,实现五轴三联动,

    安装距可自动调整,

    自动认齿并补偿侧隙,识别毛刺和磕碰。通过电主轴施加2~50Nm的扭矩载荷,水平布局直接驱动主轴设计,保持在高速的动力稳定性。在高速情况下,采用双研磨泵将研磨液喷到啮合点上,明显缩短研齿时间,提高生产率,超高速甩净,接触区移动可控,各点速度可控。可回转的操纵箱,更加人性化的人机界面,操作更加方便。防护罩美观安全,自动伸缩的防护门,便于操作者装卸工件。


    四、 主要技术参数

    1. 机床规格



      大轮最大外径

    mm

    600

    小轮最大外径

    mm

    254

    最大偏置距

    mm

    ±76

    大轮主轴端面至小轮主轴线距离

    mm

    89~270

    小轮主轴端面至大轮主轴线距离

    mm

    165~360

    主动轮主轴参数



    主轴孔大端直径

    mm

    100

    锥度


    1:20

    锥孔深度

    mm

    80

    通孔直径

    mm

    96

    从动轮主轴参数



    主轴孔大端直径

    mm

    100

    锥度


    1:20

    锥孔深度

    mm

    80

    通孔直径

    mm

    96

    制动力矩

    Nm

    2~50

    2. 数控系统


    西门子840Dsl

    小轮最高驱动速度

    rpm

    3000

    大轮最高驱动速度

    rpm

    2400

    (小轮锥)伺服驱动电机(X轴)

    Nm

    20.5

    (垂直偏置距)伺服驱动电机(Y轴)

    Nm

    20.5

    (大轮锥)伺服驱动电机(Z轴)

    Nm

    15.5

    小轮主轴AC主轴电机

    Nm

    14

    大轮主轴AC主轴电机

    Nm

    14

    3.机床外形尺寸(长×宽×高)

    mm

    2067×2738×1902

    机床净重

    7

    机床总功率

    KVA

    30

    动力电源参数

    V Hz

    380,50

    气源额定流量

    L/min

    2000

    气源压力

    Mpa

    0.6~0.7


    YK2560A CNC Bevel Gear Lapper

     

    . Machine Structure

    This is a horizontally displayed machine. The pinion spindle is the driving spindle, which makes the H(X) movements and the V (Y) movements along the column. The gear spindle is the driven spindle and makes the G (Z) movements. All the V, H and G movements are performed through the precision ball screws driven by means of servo motors along the linear guideways. Motor spindles are adopted for both the pinion and gear. The speeds of such spindles are up to 2400rpm and 3000rpm with smooth transmission, high precision and low noise level, thus prolonging the service life of the machine. The new-type machine structure is compact, with fine rigidity and less floor space. The machine operator is easy to access the workpieces.

     

    . Machine Performance and Applications

    This machine is designed to lap at high speed and precisely the spiral bevel and hypoid gear pairs of diameters up to 600mm, and modify properly the distortions of the gears after the heat treatment. The surface texture after lapping is up to 0.8 and higher, and the positions and sizes of the tooth contact patterns are improved. The gear pairs drive smoothly with low noise, and their load capacity is increased. This machine is suitable for the modifications of gears used on the rear axles after heat treatment for the heavy-duty, medium-sized and light-duty trucks.

     

    . Machine Features

    A SIEMENS 840Dsl CNC control system is equipped on the machine to perform the simultaneous 3-axis movements, automatic adjustments of the mounting distance, automatic tooth setting and backlash compensation, and the recognitions of burs and collisions. 250Nm toque load can be applied through the high-speed and great torque spindle. Thanks to the direct-driving spindle design of the horizontal arrangement, the machine can sustain the dynamic stability at high speed. Two lapping pumps are used to spray the lapping compound on the meshing point at a high speed. The machine is characterized by the shorter lapping time, increased productivity, ultra-high controllable speed at different points. The machine operation is more convenient because of swiveling control panel and the more humane man-machine interface. The machine enclosure is nice and safe, and the automatic telescopic safeguard door facilitates the loading and unloading of the workpieces.


    . Machine Specifications

    1. Capacity

    Max. diameter of gear

    mm

    600

    Max. diameter of pinion

    mm

    254

    Max. offset

    mm

    ± 76

    Gear spindle nose to axis of pinion spindle

    mm

    89270

    Pinion spindle nose to axis of gear spindle

    mm

    165360

    Pinion Spindle



    Diameter of spindle hole at large end

    mm

    100

    Taper


    1:20

    Taper depth

    mm

    80

    Diameter of through hole

    mm

    96

    Gear Spindle



    Diameter of spindle hole at large end

    mm

    100

    Taper


    1:20

    Taper depth

    mm

    80

    Diameter of through hole

    mm

    96

    Braking torque

    Nm

    250

    2. CNC Control System


    SIEMENS 840Dsl

    Max. speed of pinion

    rpm

    3000

    Max. speed of gear

    rpm

    2400

    X-axis servo motor

    Nm

    20.5

    Y-axis servo motor

    Nm

    20.5

    Z-axis servo motor

    湖南福彩网