<input id="6s00c"><u id="6s00c"></u></input><menu id="6s00c"></menu>
  • <menu id="6s00c"></menu>
  • <input id="6s00c"><u id="6s00c"></u></input>
  • <input id="6s00c"><acronym id="6s00c"></acronym></input>
    <menu id="6s00c"></menu>
    <menu id="6s00c"><u id="6s00c"></u></menu>
  • <input id="6s00c"></input>
    <object id="6s00c"><acronym id="6s00c"></acronym></object>
  • <menu id="6s00c"><u id="6s00c"></u></menu>
    <input id="6s00c"></input>
  • <menu id="6s00c"><tt id="6s00c"></tt></menu>
    TEL:022-24390723  企业邮箱入口

    YKD2280

    YKD2280数控弧齿锥齿轮铣齿机

    YKD2280 CNC SPIRAL BEVEL GEAR GENERATOR

     

    一.机床用途及使用范围

    YKD2280型机床为精密数控弧齿锥齿轮铣齿机,可用于加工直径800毫米,最大模数15毫米范围内的各种格里森齿制的弧齿锥齿轮、准双曲面齿轮和等高齿齿轮。

    本机床刀具装在摇台上(圆导轨),该结构整体刚性强,工作平稳,精度高。亦可用于硬齿面刮削,该摇台结构式齿轮机床经久耐用,正常使用寿命可达数十年。

    本机床的万能性好,适合大批量生产粗、精加工中、重型卡车、矿山机械、工程机械、船舶齿轮。

    本机床采用西门子828D数控系统和交流数字伺服系统,具有三个数控轴:工件(Y轴)、摇台(X)轴、床鞍(Z轴),可实现三轴联动,刀具主轴(S轴)采用交流变频调速,使机床无需改变任何挂轮可实现切削运动,操作更方便,柔性强,使只具有机械铣齿机操作调整经验的人员能将常用的YT2250(或Y225)、Y2280等机床调整卡的有关参数转换为本机床的相应参数使用。

    二.机床主要特点:

    采用交流变频电机作主驱动动力源,而摇台和工件主轴都由伺服电机驱动,床鞍进给由伺服电机通过滚珠丝杠驱动,简化了传统的机械结构,无需更换挂轮减少了机床调整时间,缩短了传动链,不但提高了机床精度,而且使操作更为准确、方便。本机床可配置安全防护罩和自动排屑器。机床的密封电气控制柜可配置空调。

    三.动力电源参数:380V50HZ

    四.电气主要参数:主驱动交流变频电机:15KW1500rpm

                      摇台及工件箱伺服电机:42NM1500rpm

                      进给运动伺服电机:23NM2000rpm

                      机床电气总容量:35KVA

    . Applications of Machine

      Model YKD2280 machine is a precision CNC Spiral Bevel Gear Generator, which is designed for roughing and finishing Spiral Bevel Gears and Hypoid Gears and Equidepth gears of the Gleason system with the diameter up to 800mm and module 15mm.

      On this machine, the cutter is mounted on the cradle (circular guideway). The integral structure is rigid, highly accurate and working stably. The cradle-type gear cutting machine, which is also possible for hard surfacing, is durable and the service life will be several dozens of years under normal operating conditions.

      The machine is with universal features and it is suitable for roughing and finishing, in mass production, gears used for medium & heavy load trucks, mining machineries, construction machineries and shipbuilding industry.

      The machine is equipped with a CNC control system 828D (SIEMENS) and designed to operate as a three-axis machine, i.e. cradle rotation (X axis), work spindle rotation (Y axis) and sliding base movement (Z axis) being simultaneously controlled by the CNC control system to cut gears. The rotation of cutter spindle (S axis) is controlled by an A.C. frequency-variable motor for its stepless control. Therefore, no change gears will be used on the machine for cutting gears. The machine operation is easy and flexible.  The clients who have the conventional machines can convert the machine settings used for YT2250 (or Y225) and Y2280 machines into the machine settings for the YKD2280 machine.

    . Main Features of Machine        

      An A.C. frequency-variable motor is used as a main driving power source while the cradle rotation and work spindle rotation are driven by the servo motors. The sliding base movement is driven by a servo motor through a ball screw.  All of these features of the machine are for the purpose of simplifying the conventional mechanical structure, reducing the machine setup time and shortening the transmission train because of the change gears elimination.  In this case, not only the machine accuracy is increased, but also the operation is easy and convenient.  Safety guards and an automatical chip conveyor may be provided on the machine. The machine is equipped with a sealed electrical cabinet which is with an air conditioner.

    . Power Supply: 380V, 50 HZ

    . Main Electrical Parameters:

       A.C. Frequency-variable Motor (main drive)        15KW, 1500rpm

       Servo Motors (cradle & workhead)                42NM, 1500rpm

       Servo Motor (sliding base movement)             23NM, 2000rpm

       Total Power Capacity                                    35KVA

    Ⅴ、机床主要技术参数 Specification of Machine

    被加工工件的尺寸 Dimensions of work to be cut

    最大加工模数 Max. module

    15

    mm

     

    最大节锥母线长

    Max. pitch cone distance

     

    螺旋角

    Spiral angle

    0°

    285

    mm

    15°

    350

    mm

    30°

    350

    mm

    工件的节锥角

    Pitch angle of workpiece

    最大 Max.


    90°


    最小Min.


    5°


    被磨齿轮副轴间角为90°的最大传动比 Max. gear ratio (shaft angle 90°)

    101


     

     

    被加工齿轮的

    最大节圆直径

     

    Max. pitch diameter

     

     

    被加工齿轮副

    传动比

     

    Gear ratio

     

    101

     

     

    螺旋角

     

     

    Spiral angle

    0°

    575

    mm

    15°

    700

    mm

    30°

    800

    mm

     

    21

    0°

    520

    mm

    15°

    635

    mm

    30°

    750

    mm

     

    11

    0°

    395

    mm

    15°

    500

    mm

    30°

    600

    mm

    最大齿宽   Max. face width

    100

    mm

    螺旋角     Spiral angle

    0°~60°


    最大齿高   Max. tooth depth

    32 

    mm

    齿数       Number of teeth

    4~100


    砂轮直径   Diameter of Grinding wheel

    691218

                  workhead

    从主轴端面至机床中心的距离

    Distance from face of spindle to machine center

    最大Max.

    600

    mm

    最小Min.

    125

    mm

    表示主轴端面至机床中心距离游标尺每一格的读数Reading of each graduation for Vernier & scale showing the Distance

    直尺 Scale

    1

    mm

    游标Vernier

    0.02

    mm

    主轴从中心位置的向下垂直移动Downward from center position

    当主轴端面至机床中心调整位置为右列各值时when the distance from face of spindle to machine center being at

    125~270

    25

    mm

    270~330

    70

    mm

    330~540

    90

    mm

    主轴从中心位置的向上垂直移动 Upword from center position

    90

    mm

    主轴垂直移动游标尺每格读数Reading of each graduation for Vernier & scale showing the upward and Downward

    直尺 Scale

    1

    mm

    游标Vernier

    0.02

    mm

     

    主轴锥孔尺寸

    Taper hole of spindle

    大端直径at large end

    上一个: YKH2035
    下一个: YKD2250A
    湖南福彩网